Vibratory friction machines, also called vibratory friction welding machines, work on the principle that the parts being welded are rubbed together under pressure until the friction and shear heat generated causes the contact surfaces to reach a fully molten state. Once the molten film has been formed to penetrate deep enough into the overlapping area, the relative motion stops, and the weld is cooled and solidified under pressure. The following vibratory friction machine manufacturer Suzhou Keber precision machinery for you to introduce the vibratory friction machine process steps.
1.The product to be vibratory friction welding is fixed on the tool (nest，fixture) and the nest is mounted on top of the vibratory friction machine.
2.After installing the tool, please ask the professional technician to adjust some vibration parameters of the vibration according to the welding requirements of the product. (e.g. frequency, amplitude, time, direction of vibration of the tool, etc.)
3.After adjusting the vibration parameters, the products to be welded (two splits), are put into the corresponding upper and lower tools, the upper half of the product is put into the upper tool, and the lower half of the product is put into the tool.
4.Press the double start button, the safety door begins to close, the vibration friction machine will produce vibration, the upper and lower two separated products, vibration friction, when the temperature reaches the melting point, coupled with the role of pressure, the two separated products, can be welded together.
5.Welding time is about 15 seconds, depending on the requirements of the product. The left, right, rear, upper and lower tools are separated at the same time, and the safety door is opened.
6.The welded workpiece is removed manually and the vibration friction welding process is completed.
The above content is released by the vibration friction machine-Suzhou Keber precision organization, I hope to help you! Suzhou Keber Precision Machinery has a strong non-standard mechanical R & D, design, production capacity, can be customized for the majority of customers all kinds of special machinery and equipment. The company's design and production of plastic welding equipment has been widely used in automotive, electronics, home appliances, medical equipment, nonwovens, toys and other industries, customers throughout the country, some products are exported to Europe and the United States, the Middle East and Southeast Asia countries.
0512-82288666
