Vibratory friction machine welding process can be divided into four different stages are solid friction stage, solid-liquid phase change stage, (friction welding processing) steady-state flow stage and cooling stage, in order to ensure that the entire welding area is uniformly heated to ensure uniform weld properties, attention should be paid to the entire welding process, the upper and lower parts in the weld area to be in full contact, full contact can be achieved through the improvement of the parts dimensional accuracy, structural optimization and fixture design. The following vibratory friction machine manufacturer Suzhou Keber precision machinery for everyone to popularize the use of vibratory friction machine notes.
1.After using the vibratory friction machine, it is necessary to turn off the main switch of the machine electric control and the air switch of the electric control cabinet.
2.Clean the machine after using the vibratory friction machine and oil it according to the equipment lubrication chart or oiling point.
3.Before starting the vibrating friction machine, inject oil according to the lubrication chart of the equipment and check the oil level of the oil marker or the oil injection point.
4.Vibratory friction machine operators must be familiar with the operating sequence and performance of the machine, is strictly prohibited to use the equipment over performance.
5.Vibratory friction machine operators must be familiar with the operating sequence and performance of the machine, is strictly prohibited to use the equipment over performance.
6.Vibratory friction machine operators shall be licensed after training, examination or assessment.
7.Before using the vibratory friction machine check the spindle box lubrication, clutch, brake and rotate the spindle at low speed.
8.Reset the vibratory friction machine before it stops, turn off the spindle motor, and after the spindle stops, turn off the oil pump motor.
9.Vibrating friction machine fast forward, fast backward can not be adjusted too fast to prevent danger, belt tension should be appropriate, the guard must be locked.
10.It is strictly prohibited to wear slippers, sandals, half shorts when operating the vibration friction machine to prevent iron chip burns, and it is strictly prohibited to wear gloves to operate.
11.Vibratory friction machine fixture anti-rotation block must be locked to avoid screws or anti-rotation block fly out, loading and unloading fixtures should be a special plate hand, can not be deformed taper spring fixtures mounted on the use.
12.Before using the vibration friction machine need to start the oil pump motor, elastic chuck clamping workpiece, adjust the hydraulic system pressure, working pressure, clamping pressure, top forging pressure, check the spindle box lubrication.
The above content is released by the vibration friction machine-Suzhou Keber precision organization, I hope to help you! Suzhou Keber Precision Machinery has a strong non-standard mechanical R & D, design, production capacity, can be customized for the majority of customers all kinds of special machinery and equipment. The company's design and production of plastic welding equipment has been widely used in automotive, electronics, home appliances, medical equipment, nonwovens, toys and other industries, customers throughout the country, some products are exported to Europe and the United States, the Middle East and Southeast Asian countries!
0512-82288666
